Address: No. 358, Dayuan Road, Laizhou Email: email@example.com
Phone: 0535-2481121 2715211
After-sales service: 0535-2482061
Talking about the precautions of using the static tester
In some work, there is no static electricity. Before working, the static electricity on the staff must be eliminated. But whether the static electricity is completely eliminated, we can use an electrostatic tester to determine.
Notes on the use of static tester:
① The electrostatic tester is specially used for the treatment of static electricity, and it needs to be kept away from water, oil, solvents and other conductive pollutants.
② The static tester should be stored and used in an environment with a humidity of less than 60%, and special care must be taken to ensure that no dew is formed in the environment, otherwise the electrical insulation failure of the product will be caused.
③ For accurate measurement of the instrument, please ground it properly.
④ This instrument is an electronic device, and the sensors it contains may be very sensitive to mechanical shock and impact; of course, it also contains a micro-processing chip and electronic circuits, so it cannot be used in environments with many electronic noises.
⑤ Do not insert any object into the mouth used to fix the sensor, and do not allow any foreign matter to enter the opening of the sensor.
⑥ The static tester should not be operated in an environment with corrosive acids, alkalis, smoke or corrosive gases such as chlorine.
⑦If dropped, the instrument is easily damaged. If this happens, it should be checked by an authorized technician for necessary inspection and necessary repairs. 关闭 When not in use, turn off the instrument; if not in use for a long time, remove the battery.